Features
• Maxhighinrush:120A20ms
• Low height: 15.7 mm
• 5kV dielectric strength (between coil and contacts)
• Creepagedistance:10mm
• Meeting VDE 0700, 0631 reinforce insulation
• Product in accordance to IEC 60335-1 available
• Sockets available
• Plastic sealed and flux proofed types available
• UL insulation system: Class F
• Environmental friendly product (RoHS compliant)
• Outline Dimensions: (29.0 x12.7x 15.7) mm
CONTACT DATA
Contact arrangement Contact resistance
1A, 1C
100mQ max.(at1A 6VDC)
Contact material Contact rating
AgSnO2 16A 250VAC
Inrush rating (120VAC)
NO: TV-5 80A
120A/20ms
Max. switching voltage Max. switching current
440VAC / 300VDC 16A
Max. switching power Mechanical endurance
4000VA 1 x 1 07ops
Electrical endurance
1H3A type: 7.5 x 1 04ops (16A 250VAC, General use, Room temp., 1son9s off)
1H3A type: 2.5 x 1 04ops (TV-5 120VAC, Room temp., 1son 59s off)
CHARACTERISTICS
| Insulation resistance | 1000M (at500VDC) |
Dielectric
strength | Between coil & contacts | 5000VAC 1min |
| Between open contacts | 1000VAC 1min |
| Surge voltage (between coil & contacts) | 10kV(1.2/50|js) |
| Operate time (at nomi. volt.) | 15ms max. |
| Release time (at nomi. volt.) | 8ms max. |
| Temperature rise (at nomi. volt.) | 55K max. |
| Shock resistance * | Functional | 98m/s2 |
| Destructive | 980m/s2 |
| Vibration resistance * | 10Hzto 150Hz 20g/5g |
| Humidity | 5% to 85% RH |
| Ambient temperature | -40eC to85C |
| Termination | PCB |
| Unit weight | Approx. 13.5g |
| Construction | Plastic sealed, Flux proofed |
Notes: 1) The data shown above are initial values.
2) * Index is not that of relay length direction.
COIL
Coil power Approx. 400mW
COIL DATA at 23°C
Nominal
Voltage
VDC | Pick-up
Voltage
VDC
max. | Drop-out
Voltage
VDC
min. | Max.
Voltage
VDC1) | Coil
Resistance
Q |
| 5 | 3.50 | 0.5 | 7.5 | 62x(1±10%) |
| 6 | 4.20 | 0.6 | 9.0 | 90x(1±10%) |
| 9 | 6.30 | 0.9 | 13.5 | 202x(1±10%) |
| 12 | 8.40 | 1.2 | 18 | 360x(1±10%) |
| 18 | 12.6 | 1.8 | 27 | 810x(1±10%) |
| 24 | 16.8 | 2.4 | 36 | 1440x(1±10%) |
| 482) | 33.6 | 4.8 | 72 | 5760x(1±15%) |
| 602) | 42.0 | 6.0 | 90 | 7500x(1±15%) |
| 1102) | 77.0 | 11.0 | 165 | 25200x(1: 15%) |
Notes: 1) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time.
2) For products with rated voltage ^ 48V, measures should be taken to prevent coil overvoltage in order to protect coil in test and application (eg. Connect diodes in parallel).
SAFETY APPROVAL RATINGS
| | HF115F-I.. | ..1Z(S)3A | NO: 16A250VAC at 85°C |
| UL/CUL | HF115F-I. | ..1H(S)3A | 16A250VAC
TV-5,120VAC |
| VDE | HF115F-I.. | ..1H(S)3A | 16A250VAC at 85°C |
| HF115F-I.. | ..1Z(S)3A | NO: 16A250VAC at 85°C |
Notes: 1)All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request
| ORDERING INFORMATION |
| | HF115F-I / | 012 | -1H | S | 3 | A | (XXX) |
| Type | | | | | | | |
| Coil voltage 5, 6, 9, 12, 18, 24,48, 60, 110VDC | | | | | |
| Contact arrangement 1H: 1 Form A 1Z: 1 Form C | | | | | |
| Construction1)2) | S: Plastic sealed | Nil: Flux proofed | | | | |
| Version | 3: 5.0mm | | | | | | |
| Contact material A: AgSnO2 | | | | | | |
| Special code3) | XXX: Customer special requirement | Nil: Standard | | |
Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.).
We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.).
2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
3) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC60335-1 (GWT). |
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user's responsibility to determine which product should be used only.
){kind=link}