Basic Info.
Switching Current (Max.)
0.5
Product Description
Features: Supplied in Tape & Reel, J-Lead, Excellent for Low Power Operations
> Applications: On/Off Control Switch, Position Detection, Switching Element & Others
> Markets: Appliance, Telecommunication, Security, Medical & Others
Part Description: MK 15 - 0 X X
Magnetic Sensitivity | Lead Design |
B, C, D, E, F, G | 1,2 |
Customer Options | Switch Model | Unit |
Contact Data | 66 |
Rated Power (max.) Any DC combination of V&A not to exceed their individual max.'s | 10 | W |
Switching Voltage (max.) DC or peak AC | 180 | V |
Switching Current (max.) DC or peak AC | 0.5 | A |
Carry Current (max.) DC or peak AC | 1.0 | A |
Contact Resistance (max.) @0.5V & 50mA | 150 | mOhm |
Breakdown Voltage (min.) According to EN60255-5 | 0.2 | kVDC |
Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage | 0.5 | ms |
Release Time (max.) Measured with no Coil Excitation | 0.05 | ms |
Insulation Resistance (typ.) Rh<45%, 100V Test Voltage | 1010 | Ohm |
Capacitance (typ.) @ 10kHz across open Switch | 0.3 | pF |
Housing and Lead Specifications |
Housing Material | Mineral Filled Epoxy |
Case Color | Black |
Lead design 1 | Flat, straight leads for PCB slot mounting |
Lead design 2 | Flat, bent SMD leads |
Environmental Data | Unit |
Shock Resistance (max.) 1/2 sine wave duration 11ms | 30 | g |
Vibration Resistance (max.) | 20 | g |
Operating Temperature | -40 to 130 | °C |
Storage Temperature | -50 to 130 | °C |
Soldering Temperature (max.) 5 sec. max. | 260 | °C |
Glossary Contact Form
Form A | NO = Normally Open Contacts SPST = Single Pole Single Throw |
Form B | NC = Normally Closed Contacts SPST = Single Pole Single Throw |
Form C | Changeover SPDT = Single Pole Double Throw |
Glossary Magnetic Sensitivity |
Sens. | A | E | C | D | I | F | G |
AT | 05-10 | 10-15 | 15-20 | 20-25 | 25-30 | 30-35 | 35-40 |
Handling & Assembly Instructions
> Use proper lead clamping or heat sinking techniques to prevent mechanical and/or heat stress during, soldering, and welding
> Mechanical shock as the result of dropping the reed sensor typically from a distance of greater than 12" may change it's magnetic sensitivity and/or destroy the sensor
> Series resistor recommended for >5m cable length
Magnetic properties | Conditions | Min | Typ | Max | Unit |
Pull-In | at 2 0°C | 18 | | 38 | |
Test equipment | | KMS-11 |
Pull-In in milliTesla (modified conta | MS150- phys. caused tolerance +/- 0,1mT | 1,2 | | 2,1 | mT |
Test equipment | | MS-150 |
Contact data 66/1 | Conditions | Min | Typ | Max | Unit |
Contact-material | | Rhodium |
Contact rating | Any DC combination ofV&A not to exceed their individual max.'s | | | 10 | w |
Switching voltage | DC or Peak AC | | | 180 | VDC |
Switching current | DC or Peak AC | | | 0,5 | A |
Carry current | DC or Peak AC | | | 1,25 | A |
Contact resistance static | Measured with 4 0 % overdrive Start Value | | | 150 | mOhm |
Breakdown voltage (>20 AT) | according to IEC 255-5 | 200 | | | VDC |
Special Product Data | Conditions | Min | Typ | Max | Unit |
Housing material | | epoxy resin |
Approval | | UL- File-Nr. E156887 |
Environmental data | Conditions | Min | Typ | Max | Unit |
Shock | 1/2 sine wave duration 11ms | | | 30 | q |
Vibration | from 10-2000 Hz | | | 20 | q |
Ambient temperature | | -40 | | 130 | °C |
Storage temperature | | -50 | | 130 | °C |
Soldering Temperature Tsold | Reflow acc.IPC/JEDECJ-STD-020D.1 | | | 260 | °C |
Cleaning | | fully sealed |
Address:
No. 777 Dushi Road. Minhang District. Shanghai. China, Shanghai, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.