Features
• 20Aswitchingcapability
• 5kV dielectric strength
(between coil and contacts)
• 10kVimpulsewithstand voltage
(between coil and contacts)
• creepage distance: 8mm
• PCB&QClayoutsavailable
• UL insulation system: Class F available
• Environmental friendly product (RoHS compliant)
• Outline Dimensions: (29.0 x 12.6 x 24.2) mm
CONTACT DATA
Cantact arrangement | 1A |
Contact resistance | 50mQ max.(at 1A6VDC) |
Contact material | AgSn2 |
Contact rating | 16A 250VAC |
(Res. load) | 16A 30VDC |
Max. switching voltage | 277VAC / 30VDC |
Max. switching current | 20A |
Max. switching power | 4000VAC / 480W |
Mechanical endurance | 1 x 107ops |
Electrical endurance | 1x105ops (16A250VAC, Resistive load, Room temp., 3s on 3s off) |
CHARACTERISTICS
Insulation resistance | 1000M (at500VDC) |
Dielectric strength | Between coil & contacts | 5000VAC 1min |
Between open contacts | 1000VAC1min |
Operate time (at nomi. volt.) | 20ms max. |
Release time (at nomi. volt.) | 10ms max. |
Humidity | 5% to 85% RH |
Ambient temperature | -40°C to85BC |
Shock resistance | Functional | 98m/s2 |
Destructive | 980m/s2 |
Vibration resistance | 10Hzto 55Hz1.5mm DA |
Termination | T type: PCB D type, Standard: PCB & QC |
Unitweight | Approx.15g |
Construction | Flux proofed |
Notes: 1) The data shown above are initial values.
2) Please find coil temperature curve in the characteristic curves below.
3) UL insulation system: Class F, Class B.
COIL | |
Coil power | Approx. 540mW |
COIL DATA at 23C
Nominal Voltage VDC | Pick-up Voltage VDC max. | Drop-out Voltage VDC min. | Max. Voltage VDC* | Coil Resistance Q |
5 | 4.0 | 0.5 | 6.50 | 47x(1±10%) |
6 | 4.8 | 0.6 | 7.80 | 68x(1±10%) |
9 | 7.2 | 0.9 | 11.7 | 155x(1±10%) |
12 | 9.6 | 1.2 | 15.6 | 270x(1 10%) |
18 | 14.4 | 1.8 | 23.4 | 620x(1 10%) |
24 | 19.2 | 2.4 | 31.2 | 1100x(1±10%) |
48 | 38.4 | 4.8 | 62.4 | 4400x(1 10%) |
Notes: *Maximum voltage refers to the maximum voltage which
relay coil could endure in a short period of time.
SAFETYAPPROVAL RATINGS
UL/CUL
16A 250VAC 16A 30VDC 20A125VAC
16A250VAC COS0=1
TUV
16A30VDC COS0=1
Notes: 1)All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request.
ORDERING INFORMATION
| HF62F / | 012 | -1H | T | F | (XXX) |
Type | | | | | | |
Coil voltage | 5,6,9,12,18,24,48VDC | | | | | |
Contact arrangement | 1H: 1 FormA | | | | | |
Termination T: PCB D: PCB&BendedQC Nil: PCB&QC
Insulation Standard F: Class F Nil: Class B
Special code1) XXX: Customer special requirement Nil: Standard
Notes: 1) The customer special requirement express as special code after evaluating by Hongfa.
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user's responsibility to determine which product should be used only.