Basic Info.
Model NO.
HFE18V-200/24-HB6
Theory
Electromagnetic Relay
Action Principle
Electronic Type
Contact Resistence
<0.2mq (200A)
Specification
105.3 x 45.0 x 88.7 mm
Product Description
Features
,• Ceramic brazing sealed technology guarantees no risk of arc leaking and ensures no fire or explosion.
• Filled with gas ( mostly hydrogen) to effectively prevent the
' ;. oxidation burnt when exposed to electricity; the contact
resistance is low and stable, and the parts exposed to electricity can meet IP67 protection level.
• Carryingcurrent200Acontinuouslyat 85° C.
, • Insulation resistance is 1000^3 ( 1000VDC), and dielectric
strength between the coil and contacts is 4KV, which meets the requirements of IEC 60664-1.
• Coil with energy-saving devices.
CONTACT DATA
Contact arrangement | 1H |
Contact resistence | <0.2mQ (200A) |
Rated load current | 200A |
Mechanical endurance | 2 x 105 ops |
Outline Dimensions | 105.3 x 45.0 x 88.7 mm |
| 450V type | 750V type |
Max. switching voltage | 750V | 900V |
Max. breaking current | 2000A (450V, 1op min.) | 2000A (750V, 1op min.) |
Max. switching power | 90kW | 150kW |
| Cap. load | Making: 2.5 x 104 ops (22.5Vd.c., T=1ms Inrush 400A, Steady 200A) | Making: 2.5 x 104ops (37.5Vd.c., T=1ms Inrush 400A, Steady 200A) |
Electrical endurance" | | Making: 1 op (450Vd.c., T=1ms Inrush 1350A, Steady 200A) | |
| Res. load | Breaking: 1 x 104ops (450Vd.c.,70A) | Breaking: 1 x 104ops (750Vd.c.,70A) |
| Switching: 3 x 103ops (450Vd.c., 200A) | Switching: 1 x 103ops (750Vd.c., 200A) |
Current carrying capacity2) | 200A: Cont. 300A: 60min 400A: 20min 800A: 30s 2000A: 0.6s |
Notes: 1) Until special statement, the temperature of eletrical endurance is at 23oC and the on-off ratio is 0.6s:5.4s. 2)Ambient temperature is room temperature and cross section area of wire is 60mm2 min. See Pic Endurance Capacity Curve for more information.
COIL
Nominal Voltage VDC | Pick-up Voltage VDC max. | Drop-out Voltage VDC min. | Coil power W |
12 | 9 | | Switch on:34 (time:0.2s) Carrying:4 |
24 | 18 | 2 | Switch on:34 (time:0.2s) Carrying:4 |
Notes: The values above are conservative values within the temperature rage(-40oC to 85oC), the pulling in voltage and releasing voltage are showed in the Pic Pulling in / Release Voltage Change Curve.
CHARACTERISTICS
Insulation resistance | 1000M (at1000VDC) |
Dielectric | Between coil & contacts | 4000VAC 1min. |
strength | Between open contacts | 3000VAC 1min. |
Operate time (at nomi. volt.) | 30ms max. |
Release time (at nomi. volt.) | 10ms max. |
Shock | Functional | 196m/s2 |
resistance | Destructive | 490m/s2 |
Vibration resistance | 10Hzto500Hz 49m/s2 |
Humidity | 5% to 85% RH |
Ambient temperature | -40oC to 85oC |
Termination | M8 screw thread |
Unitweight | Approx.650g |
Notes: The data shown above are initial values.
ORDERING INFORMATION
Type
Contact rating
HFE18V-200/750- 12- H C6
V: Vehicle
200: 200A
Load voltage
750: 750VDC Nil: 450VDC
Coil voltage
12: 12VDC 24: 24VDC
Contact arrangement H: 1 FormA
Coil input terminal L: wire C: connector B: wire + connector Load input terminal 6: Cu-Bus-Barterminal
Special code1)
XXX: Customer special requirement
Nil: Standard
Notes: 1)The customer special requirement express as special code after evaluating by Hongfa
Address:
No. 777 Dushi Road. Minhang District. Shanghai. China, Shanghai, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.