Features
Low height 10.5mm
Low coil power
High switching capacity
1A: 8A250VAC
2A,1A+1B: 5A250VAC
1 Form A, 2 Form A, 1 Form A+1 Form B configuration
3kV dielectric strength (between coil and contacts)
Environmental friendly product (RoHS compliant)
CONTACT DATA
| Contact arrangement | 1A | 2A, 1A+1B |
Contact
resistance | Nogoldplated: 50mO (at 1A6VDC) Gold plated:50^ (at 0.1A6VDC) |
| Contact material | AgSnO2 |
| Contact rating | 8A250VAC
(COS0=1.0)
5A30VDC(T=0ms) | 5A250VAC
(COS0=1.0)
5A30VDC(T=0ms) |
| Max. switching voltage | 380VAC / 240VDC |
| Max. switching current | 8A | 5A |
| Max. switching power | 2000VA/150W | 1250VA/150W |
| Mechanical endurance | 1 x 107ops |
| Electrical endurance | 1 x 105ops (8A 250VAC, at 40 ^ ,1 s on 9s off) 3 x 104ops (5A 250VAC, at 40 ^, 2s on 2s off) |
| CHARACTERISTICS |
| Insulation resistance | 1000MQ (at500VDC) |
Dielectric
strength | Between coil & contacts | 3000VAC 1min |
| Between open contacts | 1000VAC 1min |
| Between contact sets | 2000VAC 1 min |
| Surge voltage (between coil and contacts) | 5kV (1.2/50Ms) |
| Operate time (single side stable) | 10ms max. |
| Release time (single side stable) | 5ms max. |
| Set time(latching) | 10ms max. |
| Reset time (latching) | 10ms max. |
| Shock resistance | Functional | 196m/s2 |
| Destructive | 980m/s2 |
| Vibration resistance | Functional | 10Hzto55Hz 2.0mm DA |
| D estructive | 10Hzto55Hz 3.5mm DA |
| Humidity | 5% to 85% RH |
| Ambient temperature | -40°C to 85°C |
| Termination | pcb |
| Unit weight | Approx. 4.5g |
| Construction | Plastic sealed Flux proofed |
Notes: The data shown above are initial values.
COIL
Coil power
Single side stable: Approx. 300mW 1 coil latching:Approx. 150mW 2 coils latching: Approx. 300mW
COIL DATA at 23°C
Single side stable (300mW)
Nominal
Voltage
VDC | Pick-up
VDC
max. | Drop-out
Voltage
VDC
min. | Max.
Allowable
Voltage
VDC | Coil Resistance |
| 3 | 2.4 | 0.3 | 3.9 | 30x(1±10%) |
| 5 | 4.0 | 0.5 | 6.5 | 83x(1±10%) |
| 6 | 4.8 | 0.6 | 7.8 | 120x(1±10%) |
| 9 | 7.2 | 0.9 | 11.7 | 270x(1±10%) |
| 12 | 9.6 | 1.2 | 15.6 | 480x(1±10%) |
| 18 | 14.4 | 1.8 | 23.4 | 1080x(1±10%) |
| 24 | 19.2 | 2.4 | 31.2 | 1920x(1±10%) |
1 coil latching (150mW)
Nominal
Voltage
VDC | Set Voltage VDC max. | Reset
Voltage
VDC
max. | Max.
Allowable
Voltage
VDC | Coil Resistance |
| 3 | 2.4 | 2.4 | 3.9 | 60x(1±10%) |
| 5 | 4.0 | 4.0 | 6.5 | 167x(1±10%) |
| 6 | 4.8 | 4.8 | 7.8 | 240x(1±10%) |
| 9 | 7.2 | 7.2 | 11.7 | 540x(1±10%) |
| 12 | 9.6 | 9.6 | 15.6 | 960x(1±10%) |
| 18 | 14.4 | 14.4 | 23.4 | 2160x(1±10%) |
| 24 | 19.2 | 19.2 | 31.2 | 3840x(1±10%) |
2 coils latching (300mW)
Nominal
Voltage
VDC | Set Voltage VDC max. | Reset
Voltage
VDC
max. | Max.
Allowable
Voltage
VDC | Coil Resistance |
| 3 | 2.4 | 2.4 | 3.9 | 30x(1±10%) |
| 5 | 4.0 | 4.0 | 6.5 | 83x(1±10%) |
| 6 | 4.8 | 4.8 | 7.8 | 120x(1±10%) |
| 9 | 7.2 | 7.2 | 11.7 | 270x(1±10%) |
| 12 | 9.6 | 9.6 | 15.6 | 480x(1±10%) |
| 18 | 14.4 | 14.4 | 23.4 | 1080x(1±10%) |
| 24 | 19.2 | 19.2 | 31.2 | 1920x(1±10%) |
SAFETY APPROVAL RATINGS
| UL/CUL | 1A:
8A250VAC
5A30VDC
B300
R150
1/6 HP 125VAC/250VAC | 2A/1A+1B:
5A250VAC
5A30VDC
B300
R150
1/6HP 125VAC/250VAC(For 1 HD) 1/10HP 125VAC/250VAC(For 2H) |
| | 1A: | 2A/1A+1B: |
| TUV | 8A250VAC | 5A250VAC |
| 5A 250VAC (COS0=0.4) | 3A 250VAC (COS0=0.4) |
| | 5A30VDC | 5A30VDC |
Notes: 1)AII values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request.
ORDERING INFORMATION
| HFE60/ | 12 | -1HD | S | T | G | -L 2 | -R | (XXX) |
| Type | | | | | | | | |
Coil voltage Contact form Construction
3,5,6,9,12,18,24VDC
1H: 1 Form A 2H: 2 Form A
1HD: 1 Form A+1 Form B
S: Plastic sealed Nil: Flux proofed
Contact material T: AgSnO2
Contact plating G: Gold plated Nil: No gold plated
Sort L1: 1 coil latching L2: 2 coils latching Nil: Single side stable
Polarity R: Reverse polarity Nil: Standard polarity
Special code1) XXX: Customer special requirement Nil: Standard
Notes:1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.).
We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.).
2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
3) The customer special requirement express as special code after evaluating by Hongfa.
){kind=link}