Basic Info.
Product Description
Features
• Subminiature high power latching relay
• Low coil power
1 coil latching: approx. 0.4W
2 coils latching: approx. 0.8W
• 15Aswitchingcapability
• 1 FormAand 1 FormCconfigurations
• Subminiature, standard PCB layout
• Plastic sealed and flux proofed types available
• Environmental friendly product (RoHS compliant)
• Outline Dimensions: (19.0 x15.2x15.5) mm
CONTACT DATA
COIL DATA
at 23#C
Contact arrangement | 1A | 1C |
Contact resistance | 100mQmax.(at1A 6VDC) |
Contact material | AgSn2 |
Contact rating (Res. load) | 10A277VAC/30VDC |
Max. switching voltage | 277VAC / 30VDC |
Max. switching current | 15A | 10A |
Max. switching power | 2770VA/300W |
Mechanical endurance | 1 x 107ops |
Electrical endurance | 1HT:6x103ops (15A 120VAC, Incandescent lamp, at 60^, 1s on 59s off) 1x104 ops(10A277VAC, Resistive load, at 60^, 1s on 9s off) |
CHARACTERISTICS
Insulation resistance | 100MQ(at500VDC) |
Dielectric strength | Between coil & contacts | 2000VAC 1min |
Between open contacts | 750VAC 1min |
Set time (at nomi. volt.) | 8ms max. |
Reset time (at nomi. volt.) | 5ms max. |
Shock resistance | Functional | 98m/s2 |
Destructive | 980m/s2 |
Vibration resistance | 10Hzto 55Hz1.5mm DA |
Humidity | 5% to 85% RH |
Ambient temperature | -40DC to85°C |
Termination | PCB |
Unit weight | Approx. 9g |
Construction | Plastic sealed, Flux proofed |
Notes: 1) For sealed type, the vent-hole cover should be excised. 2) The data shown above are initial values.
COIL
1 coil latching
Nominal Voltage VDC | Set Voltage VDC max. | Reset Voltage VDC max. | Pulse Width (ms) min. | Max. Voltage VDC | Coil Resistance Q |
5 | 4.0 | 4.0 | 100 | 10 | 62.5x(1±10%) |
6 | 4.8 | 4.8 | 100 | 12 | 90x(1±10%) |
9 | 7.2 | 7.2 | 100 | 18 | 202.5x(1±10%) |
12 | 9.6 | 9.6 | 100 | 24 | 360x(1 10%) |
24 | 19.2 | 19.2 | 100 | 48 | 1440x(1±10%) |
48 | 38.4 | 38.4 | 100 | 96 | 5760x(1±10%) |
2 coils latching
Nominal Voltage VDC | Set Voltage VDC max. | Reset Voltage VDC max. | Pulse Width (ms) min. | Max. Voltage VDC | Coil Resistance Q |
5 | 4.0 | 4.0 | 100 | 10 | 31.5+31.5x(1±10%) |
6 | 4.8 | 4.8 | 100 | 12 | 45+45x(1±10%) |
9 | 7.2 | 7.2 | 100 | 18 | 101.5+101.5x(1±10%) |
12 | 9.6 | 9.6 | 100 | 24 | 180+180x(1 10%) |
24 | 19.2 | 19.2 | 100 | 48 | 720+720x(1±10%) |
48 | 38.4 | 38.4 | 100 | 96 | 2880+2880x(1±10%) |
SAFETY APPROVAL RATINGS |
UL/CUL | N0:10A277/250/125VAC, Resistive at608C NO: Standard ballast 5.5A277/220/120VAC at 60"C NO:ectronicballast5A,120VACat60°C NO: Tungsten (incandescent) 15A 120VAC at 608C NO: Tungsten (incandescent) 5A 277VAC at 60nC NO: 1/6HP240/120VAC at85°C |
VDE | NO: 10A250VAC, Resistive, at 858C NO/NC: 5A250VAC, Resistive, at85nC |
...... Notes: 1)All values unspecified are at room temperature.
1coillatching:Approx.0.4W 2) Only typical loads are listed above. Other load specifications
2 coils latching: Approx. 0.8W can be available upon request.
Address:
No. 777 Dushi Road. Minhang District. Shanghai. China, Shanghai, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.