Features
• 4.5kVdielectricstrength (between coil and contacts)
• Heavy load up to 6250VA
• Ideal for motor switching
• PCB & QC layouts
• UL insulation system: Class F
• Environmental friendly product (RoHS compliant)
| Contact arrangement | 1A |
| Contact resistance | 100mQmax.(at1A 6VDC) |
| Contact material | AgSn2, AgCdO |
| Contact rating | Resistive: 20A250VAC Motor: 2HP 240VAC |
| Max. switching voltage | Resistive: 250VAC |
| Max. switching current | 25A |
| Max. switching power | 6250VA |
| Mechanical endurance | 2 x 106ops |
| Electrical endurance | H, HTtype: 1 x 105ops (20A 250VAC, Resistive load, at 60^, 1.5s on 1.5s off) |
Coil power
Approx. 900mW
| COIL DATA at23C |
Nominal
Voltage
VDC | Pick-up
Voltage
VDC
max. | Drop-out
Voltage
VDC
min. | M ax. Voltage VDC* | Coil
Resistance
a |
| 5 | 3.5 | 0.5 | 6.0 | 27.8x(1±10%) |
| 12 | 8.4 | 1.2 | 14.4 | 160x(1±10%) |
| 24 | 16.8 | 2.4 | 28.8 | 640x(1±10%) |
| 48 | 33.6 | 4.8 | 57.6 | 2560x(1±10%) |
Notes: * Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time.
CHARACTERISTICS
| Insulation resistance | 1000MQ (at500VDC) |
Dielectric
strength | Between coil & contacts | 4500VAC 1min |
| Between open contacts | 1000VAC 1min |
| Operate time (at nomi. volt.) | 20ms max. |
| Release time (at nomi. volt.) | 10ms max. |
| Temperature rise (at nomi. volt.) | 60K max. |
| Shock resistance | Functional | 196m/s2 |
| D estructive | 980m/s2 |
| Vibration resistance | 10Hzto 55Hz 1.5mm DA |
| Ambient temperature | -40 to 85 |
| Humidity | 5% to 85% RH |
| Termination | PCB & QC |
| Unit weight | Approx. 26g |
| Construction | Flux proofed |
SAFETYAPPROVAL RATINGS
| | 25A 277VAC |
| | 20A 250VAC |
| UL/CUL | 1HP 120VAC |
| | 2HP 240VAC |
| VDE | 25A 250VAC at 55oC 20A 250VAC at 85oC |
Notes: 1)All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request.
Notes: The data shown above are initial values.
HONGFA RELAY
| Contact arrangement | 1A |
| Contact resistance | 100mQmax.(at1A 6VDC) |
| Contact material | AgSn2, AgCdO |
| Contact rating | Resistive: 20A250VAC Motor: 2HP 240VAC |
| Max. switching voltage | Resistive: 250VAC |
| Max. switching current | 25A |
| Max. switching power | 6250VA |
| Mechanical endurance | 2 x 106ops |
| Electrical endurance | H, HTtype: 1 x 105ops (20A 250VAC, Resistive load, at 60^, 1.5s on 1.5s off) |
Coil power
Approx. 900mW
| COIL DATA at23C |
Nominal
Voltage
VDC | Pick-up
Voltage
VDC
max. | Drop-out
Voltage
VDC
min. | M ax. Voltage VDC* | Coil
Resistance
a |
| 5 | 3.5 | 0.5 | 6.0 | 27.8x(1±10%) |
| 12 | 8.4 | 1.2 | 14.4 | 160x(1±10%) |
| 24 | 16.8 | 2.4 | 28.8 | 640x(1±10%) |
| 48 | 33.6 | 4.8 | 57.6 | 2560x(1±10%) |
Notes: * Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time.
CHARACTERISTICS
| Insulation resistance | 1000MQ (at500VDC) |
Dielectric
strength | Between coil & contacts | 4500VAC 1min |
| Between open contacts | 1000VAC 1min |
| Operate time (at nomi. volt.) | 20ms max. |
| Release time (at nomi. volt.) | 10ms max. |
| Temperature rise (at nomi. volt.) | 60K max. |
| Shock resistance | Functional | 196m/s2 |
| D estructive | 980m/s2 |
| Vibration resistance | 10Hzto 55Hz 1.5mm DA |
| Ambient temperature | -40 to 85 |
| Humidity | 5% to 85% RH |
| Termination | PCB & QC |
| Unit weight | Approx. 26g |
| Construction | Flux proofed |
SAFETYAPPROVAL RATINGS
| | 25A 277VAC |
| | 20A 250VAC |
| UL/CUL | 1HP 120VAC |
| | 2HP 240VAC |
| VDE | 25A 250VAC at 55oC 20A 250VAC at 85oC |
Notes: 1)All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request.
Notes: The data shown above are initial values.
ORDERING INFORMATION
HF160F /
Type
12
Coil voltage
5,12,24,48VDC
Contact arrangement Termination Contact material Special code3)
H: 1 Form A
5: PCB & QC
T: AgSn2 Nil: AgCdO
XXX: Customer special requirement
-H 5
Nil: Standard
(XXX)
Notes: 1) Water cleaning or surface process is not suggested after the flux-proofed relays are assembled on PCB.
2) Flux-proofed relays can not be used in the environment with pollutants like H2S, S2, N2, dust, etc.
3) The customer special requirement express as special code after evaluating by Hongfa.
){kind=link}