Basic Info.
Theory
Electromagnetic Relay
Max. Switching Current
5A
Max. Switching Power
1250va/150W
Trademark
File No.: CQC09002034521
Specification
24.4 x 12.8 x 24.8
Product Description
CONTACT DATA
Contact arrangement | 2A |
Contact resistance | 100mQ max.(at 1A 6VDC) |
Contact material | AgSn2,AgCd |
Contact rating (Res. load) | 5A250VAC/30VDC |
Max. switching voltage | 250VAC / 30VDC |
Max. switching current | 5A |
Max. switching power | 1250VA/150W |
Mechanical endurance | 1 x 107ops |
Electrical endurance | 5 x 104ops (5A 250VAC, Resistiveload, Room temp., 1s on 9s off) |
CHARACTERISTICS
Insulation resistance | 1000M (at 500VDC) |
Dielectric strength | Between coil & contacts | 4000VAC 1min |
Between open contacts | 1000VAC 1min |
Between contact sets | 2000VAC 1min |
Operate time (at nomi. volt.) | 15ms max. |
Release time (at nomi. volt.) | 10ms max. |
H umidity | 5% to 85% RH |
Ambient temperature | -40°C to 70°C |
Shock resistance | Functional | 98m/s2 |
Destructive | 980m/s2 |
Vibration resistance | 10Hzto 55Hz 1.5mm DA |
Termination | PCB |
Unit weight | Approx. 14.5g |
Construction | Plastic sealed |
Notes: 1) The data shown above are initial values.
2) Please find coil temperature curve in the characteristic curves below.
3) UL insulation system: Class A
COIL
Coil power Approx. 530mW
COIL DATA at 23°C
Nominal Voltage VDC | Pick-up Voltage VDC max. | Drop-out Voltage VDC min. | Max. Voltage VDC* | Coil Resistance Q |
5 | 3.75 | 0.25 | 6.5 | 47x(1±10%) |
6 | 4.50 | 0.30 | 7.8 | 68x(1±10%) |
9 | 6.75 | 0.45 | 11.7 | 155x(1±10%) |
12 | 9.00 | 0.60 | 15.6 | 270x(1±10%) |
18 | 13.5 | 0.90 | 23.4 | 620x(1±10%) |
24 | 18.0 | 1.20 | 31.2 | 1080x(1±10%) |
48 | 36.0 | 2.40 | 62.4 | 4400x(1±10%) |
Notes: *Maximum voltage refers to the maximum voltage which relay
coil could endure in a short period of time.
SAFETY APPROVAL RATINGS
| 5A250VAC |
UL/CUL | 5A30VDC |
| TV-3 125VAC |
TUV | 5A250VAC 5A30VDC |
Notes: 1)All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request
ORDERING INFORMATION
| HF42F /012-2H S-(XXX) |
Type | |
Coil voltage 5,6,9,12,18,24,48VDC
Contact arrangement 2H: 2 Form A
Construction1)
S: Plastic sealed
Contact material
Special code2)
Customer special requirement
Nil: Standard
Notes: 1) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
2) The customer special requirement express as special code after evaluating by Hongfa.
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user's responsibility to determine which product should be used only.
Address:
No. 777 Dushi Road. Minhang District. Shanghai. China, Shanghai, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.