Basic Info.
Contact Arrangement
1A,1c
Dielectric Strength 3)
500VAC
Shock Resistance 5)10)
196m/S2
Product Description
eatures
. 30Aswitchingcapability
• Ambient temp, range up to 125°C
• 1 Form A & 1 Form C contact arrangement
• Plastic sealed and dust protected types available
• RoHS & ELV compliant
CHARACTERISTICS
| Contact arrangement | 1A,1C |
| Voltage drop (initial) | NO:Typ.15mV,250mV max.(at 10A) NC:Typ.25mV,250mV max.(at 10A) |
| Max. continuous current1^10) | 30A (Resistive) |
| Max. switching current10) | 30A (Resistive) |
| Max. switching voltage 2) | 27VDC (Resistive) |
| Min. contact load | 1A 6VDC |
| Electrical endurance | See "CONTACT DATA" |
| Mechanical endurance | 1 x107ops (300OPS/min) |
| Initial insulation resistance | 100M (at500VDC) |
| Dielectric strength 3) | 500VAC |
| Operate time 10) | Typ.: 5ms (at nomi. vol.) Max.: 10ms (atnomi. vol.) |
| Release time 4) 10) | Typ.: 2ms Max.: 10ms |
| Ambient temperature | 40oC to125oC |
| Vibration resistance 5) 10) | 10Hzto60Hz 0.35mm DA 60Hzto500Hz 49m/s2 |
| Shock resistance 5)10) | 196m/s2 |
| Flammability 6) | UL94-HB or better (meets FMVSS 302) |
| Termination | QC, PCB 7) |
| Construction | Plastic sealed, Dust protected |
| Unit weight | Approx. 22g |
| Mechanical data 8) | cover retention (pull & push): 200N min. terminal retention (pull & push): 100N min. terminal resistance to bending (front & side): 10N min. 9) |
1) For NO contacts, measured when applying 100% rated votage oncoil.
2) See "Load limit curve" for details.
3) 1min, leakage current less than 1mA.
4) The value is measured when voltage drops suddenly from nominal voltage to 0 VDC and coil is not paralleled with suppression circuit.
5) When energized, opening time of NO contacts shall not exceed 100^s, when non-energized, opening time of NC contacts shall not exceed 100^s, meantime, NO contacts shall not be closed.
6) FMVSS: Federal MotorVehicle Safety Standard.
7) Since it is an environmental friendly product, please select lead-free solder when welding. The recommended soldering temperature and timeis(250±3) ,(5 0.3)s.
8) Only valid for QC version.
9) Test point is at 2mm away from teminal end, and after removing testing force, the terminal transfiguration shall not exceed 0.5mm.
10) Only for the 12VDC coil voltage type.
| CONTACT DATA5) |
Load
voltage | | | Load current A | On/Off ratio | Electrical | Contact
material | Load wiring
diagram 3) | Ambient
temp. |
| Load type | 1C | 1A | On | Off | endurance |
| | | NO | NC | NO | s | s | OPS |
| | Resistive | Make | 20 | 10 | 30 | 2 | 2 | 5 | AgSno2 | See diagram 1 | |
| | Break | 20 | 10 | 30 | 2 | 2 | 1x105 | or diagram 4 | |
| 13.5VDC | Inductive | Make 1) | 40 | 20 | 40 | 2 | 2 | 5 | AgSno2 | See diagram 2 | |
| Break | 20 | 10 | 20 | 2 | 2 | 1x10 | or diagram 5 | |
| | Lamp 4) | Make | 100 2) | --- | 100 2) | 2 | 2 | 1x105 | AgSnO2 | See | See |
| | Break | 20 | --- | 20 | 2 | 2 | diagram 3 | Ambient
temp.
curve |
| | Resistive | Make | 20 | 10 | 20 | 2 | 2 | 5 | AgSnO2 | See diagram 1 |
| | Break | 20 | 10 | 20 | 2 | 2 | 1x105 | or diagram 4 |
| 27VDC | Inductive | Make 1) | 38 | 28 | 38 | 2 | 2 | 1x105 | AgSnO2 | See diagram 2 | |
| | Break | 15 | 6 | 15 | 2 | 2 | or diagram 5 | |
| | Lamp 4) | Make | 70 2) | --- | 70 2) | 2 | 2 | 1x105 | AgSnO2 | See | |
| | Break | 7 | --- | 7 | 2 | 2 | diagram 3 | |
Address:
No. 777 Dushi Road. Minhang District. Shanghai. China, Shanghai, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
){kind=link}