Basic Info.
Product Description
10Aswitching capability • 5kV dielectric strength (between coil and contacts) • Sockets available • Plastic sealed and flux proofed types available • UL insulation system: Class F available • Environmental friendly product (RoHS compliant) • Outline Dimensions: (29.0 x 13.0x 26.0) mm |
Contact arrangement | 1A, 1C |
Contact resistance | 50mQmax.(at1A24VDC) |
Contact material | AgSnO2, AgNi, AgCdO |
Contact rating | Resistive: 10A277VAC/30VDC TV-5 120VAC |
Max. switching voltage | 277VAC / 30VDC |
Max. switching current | 10A |
Max. switching power | 2770VA/300W |
Mechanical endurance | 1 x 107ops |
Electrical endurance | 1 x 105ops(10A 277VAC, Resistive load, Room temp., 1s on 9s off) 1 x 105ops(10A 30VDC, Resistive load, Room temp., 1s on 9s off) |
Notes: For plastic sealed type, the venting-hole should be excised in electrical endurance test. |
Insulation resistance | 1000MQ(at500VDC) |
Dielectric strength | Between coil & contacts | 5000VAC1min |
Between open contacts | 1000VAC1min |
Operate time (at nomi. volt.) | 15ms max. |
Release time (at nomi. volt.) | 5ms max. |
Vibration resistance | 10Hzto 55Hz1.5mm DA |
Shock resistance | Functional | 98m/s2 |
Destructive | 980m/s2 |
Humidity | 5% to 85% RH |
Ambient temperature | -40C to70C |
Termination | PCB |
Unit weight | Approx. 18g |
Construction | Plastic sealed, Flux proofed |
| | | |
Notes: 1) The data shown above are initial values. 2) Please find coil temperature curve in the characteristic curves below. 3) UL insulation system: Class F, Class B. |
COIL Coil power Approx. 530mW |
Nominal Voltage VDC | Pick-up Voltage VDC max. | Drop-out Voltage VDC min. | Max. Voltage VDC* | Coil Resistance Q |
3 | 2.25 | 0.3 | 4.2 | 17x(1±10%) |
5 | 3.75 | 0.5 | 7.0 | 47x(1±10%) |
6 | 4.50 | 0.6 | 8.4 | 68x(1±10%) |
9 | 6.75 | 0.9 | 12.6 | 160x(1±10%) |
12 | 9.00 | 1.2 | 16.8 | 275x(1±10%) |
18 | 13.5 | 1.8 | 25.2 | 620x(1±10%) |
24 | 18.0 | 2.4 | 33.6 | 1100x(1±10%) |
48 | 36.0 | 4.8 | 67.2 | 4170x(1 10%) |
60 | 45.0 | 6.0 | 84.0 | 7000x(1 10%) |
Notes: 1)When requiring pick-up voltage < 75% of nominal voltage,special order allowed. 2) * Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 3) Under ambient temperature, applying more than 80% of rating voltagetocoil, relaywill take action accordingly. But in orderto meet the stated product performance, please apply rated voltage to coli. |
UL/CUL | AgCdO | 1 Form A | TV-5 120VAC 10A277VAC General purpose 10A30VDC Resistive 1/3HP250VAC 1/4HP125VAC |
1 Form C | TV-5 120VAC 10A277VAC General purpose 10A 30VDC Resistive 1/3HP250VAC N0:1/4HP 125VAC |
AgSnO2 AgNi | 10A277VAC General purpose 10A30VDC Resistive 1/3HP250VAC 1/4HP 125VAC TV-5 120VAC |
TUV | AgCdO AgSnO2 | 10A250VAC 10A30VDC |
Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. |
Address:
No. 777 Dushi Road. Minhang District. Shanghai. China, Shanghai, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics
Company Introduction:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.